Introduction for choosing the right material of electric valves

2018-04-20 18:11Amy
7

The selection of the material of the electric actuator valve is very important. The correct selection can make the valve work for a long period of time without failure. Valves have many types, such as: ball valve, butterfly valve,gate valve, globe valve, plug valve, control valve, etc.And according to the structure, those valves can be generally divided into valve body, valve disc,valve seat, bonnet and packing.

cast iron manual gate valves.jpg


Material Applicable conditions


Gray cast iron Gray cast iron is suitable for medium, such as water, steam, air, gas and oil, with a nominal pressure of PN1.0MPa and a temperature of -10 to 200.

Malleable cast iron Suitable for water, steam, air and oil media with a nominal pressure of PN2.5MPa and a temperature of -30~300.


Ductile iron is suitable for PN4.0MPa, temperature -30 ~ 350; water, steam, air and oil and other media.


Acid-resistant high-silica ductile iron Suitable for corrosive media with a nominal pressure of PN0.25MPa and a temperature below 120.


Carbon steel is suitable for medium pressure PN32.0MPa, temperature -30 ~ 425; water, steam, air, hydrogen, ammonia, nitrogen and petroleum products.


Copper alloy Suitable for PN2.5MPa water, seawater, oxygen, air, oil and other media.


High temperature copper Suitable for steam and petroleum products with a nominal pressure of PN17.0MPA and a temperature of 570.


Low temperature steel is suitable for medium pressure PN6.4Mpa, temperature -196 ethylene, propylene, liquid natural gas, liquid nitrogen and other media.


Stainless acid-resistant steel Suitable for medium pressure PN6.4Mpa, temperature 200 nitric acid, acetic acid and other media.

cast iron gate valve.jpg



name:
Message:
submit